• Home
• Consumer rights
• Catalog
• Guarantees
• Contacts

Welcome to our site !

___________________________________________________________________________________

• Medical X-ray processor Kodak 102

  Medical X-ray processor Kodak 102:

  search:

  Dimensions (L x W x H): 77 x 59 x 42 cm

  Footprint 0,45 m2.

  empty weight - 35 kg, filled - 50 kg.

  tank of 5 liters.

  Processing time: 105 sec.

  Capacity: up to 90 shots (35h43) per hour. Formats

  film is processed, from 35h43 to 10x10 cm

  formats obrabytyvaemoy roll of film: at least 70 mm.

  Water consumption: 1.9 liters / min. with minimal processing mode.

  Upgrade Solutions: automatic depending on the length of the film

  temperature solutions: developer - 28-37 ° C, the fixer - Automatic alignment of the heat exchanger. Development of medical X-ray machine KODAK processor 102 - Automatic roller machine for processing letters of medical X-ray films. This compact, easy to install and use, and reliability.

  Requirements for premises:

  - Supply of fresh water shut-off valve (as when connecting washing machines), water pressure - 2-6 bar 929-85 pounds per square inch.

  - Drainage system. Plastic tube - 50 mm (2 ") or more of the system includes a siphon to prevent odors from sewers at least 5% down the slope to drain.

  - Power: protected ground and the fuse socket.

  setting: Unpack the unit by removing the roller assembly, since assembly of the drying chamber. The spirit level placed on the side walls of the machine, adjust the leveling jacks.

  connection:

  - Water supply, connect a water hose to a source of fresh water.

  - Connect the supplied hose the color of the label on the front panel. Before attaching the hose to the fitting on the hose clamp placed (heat and hot water hose). Note the color coding when connecting: Developer - red; Fixer - blue.